AMPOWER Academy

3D printing at
Eaton Aerospace

Fueling progress: How Eaton Aerospace’s dedication to
3D Printing
elevated aircraft performance

Eaton Aerospace

Share article

Image source: Eaton
Fuel Jet Pump. Image courtesy: Eaton Aerospace

Eaton Aerospace's 3D Printing Success:
23 Flight-Ready components

EATON AEROSPACE is a leading aerospace company with a century-long history. The company designs, manufactures, and distributes advanced systems and components for aircrafts. Their wide range of products includes hydraulic, fuel, motion control, and electrical systems for commercial and military aircraft, helicopters, UAVs and space vehicles. With a global presence and collaborations with major manufacturers, they play a vital role in shaping the future of aerospace engineering, delivering innovative solutions for improved performance and efficiency.

Since 2016, EATON AEROSPACE has been developing 3D Printing and potential applications in the Aerospace sector. In 2020, 3 qualified components were strategically launched into serial production. 3 years later today, already 23 components have been awarded with EATON customers which is an impressive growth rate considering the high hurdles of Aerospace qualification efforts. As Michael York, Director of Additive Manufacturing at Eaton Aerospace, put it: “At Eaton Aerospace we are leveraging the power of Additive Manufacturing to produce superior products and systems”.

A clear 3D printing strategy focusing on added value

One aspect, that is seen critical for this success at EATON AEROSPACE, is a clear 3D Printing strategy for added value. 3D Printing has no end by itself, but rather needs to provide added value in 4 different categories, that were established in the strategy:

Reduced development time thus earlier go to market

Improved part performance such as optimized packaging, reduced weight, pressure drop (hydraulics) or improved heat management

Reduced cost

Increased sustainability

  • Environmentally
  • supply chain resilience

With this added value centric approach, the EATON AEROSPACE Management was deeply involved and committed regarding the implementation of 3D Printing and the necessary monetary and capacity investments. This strategy also involves a long-term commitment. It was clear from the beginning, that the success in 3D Printing does not come overnight but rather must be worked on for several years and the resulting applications today prove, that EATON AEROSPACE was very successful with this long-term approach.

Besides Management, the strategy also serves engineering as a guidance and motivation. Especially by solving today’s problems with 3D Printing and increasing performance of components is what increases awareness and support in engineering. Many companies in highly regulated industries such as Aviation or Medical still struggle because of a historically risk-averse engineering department. With this value-add centric 3D Printing strategy, EATON AEROSPACE was successfully involving all relevant stakeholders from senior management, product management, quality management and engineering.

Lesson 1

Leveraging pilot projects for
effective 3D Printing adoption

Part of a 3D Printing strategy should be the focus on strategic projects. A company-wide training needs to be established, but it is just the beginning. Soon, pilot projects need to be identified that are being driven all the way through qualification so the company can prove the successful implementation in different business units before adapting the technology broader. Qualification procedures and quality management can learn along those pilot projects which accelerates later application implementations.

Fuel housing. Image courtesy: Eaton Aerospace

Lesson 2

Large hydraulic housing. Image courtesy: Eaton Aerospace

Local champions and one 3D
Printing Center of Excellence

EATON AEROSPACE has a relatively decentralized company structure, with engineering capacities in over 41 different facilities. This bears a challenge for every company that wants to implement a new manufacturing technology such as 3D Printing. EATON AEROSPACE tackled this challenge successfully by a dedicated structure for their 3D Printing approach. In addition to a deccentrally organization, a centralized “3D Printing Center of Excellence” was established in Charlson, South Carolina, where machine technology and additional intra-company services for design and printing of parts take place.

Learning 3

Key Learnings

EATON AEROSPACE has proven that 3D Printing is here to stay in Aerospace. The technology solves today’s manufacturing problems and improves part performance which reduces cost and increases sustainability on both ends, environment and supply chain. With those three learnings, EATON AEROSPACE was able to implement 3D Printing and set the basis for a high growth within the company in the coming years.

Further success stories

Training

Advance your 3D Printing success story

Would you like to further advance your 3D Printing success story?  We learned that training a broad number of employees is key to increase the usage of 3D Printing in a company and to successfully launch new applications.

You can try out the AM Fundamentals course of the AMPOWER Academy free of charge

Additive Manufacturing Training AM Fundamentals

AM Fundamentals Trial

Understand the most important topics to get started with Additive Manufacturing

Sinter-based AM technologies and process chain

Sinter-based AM - a technology overview

Many different printing technologies - one sintering process

The sinter-based AM (SBAM) technologies have, as the name suggests, the sintering process in common. In this process, the printed green part is consolidated into a dense part and receives its final properties. The green part can be printed in advance using different technologies.They all have in common that metal powder is bound to the desired shape by a binder. The best-known printing technologies include Binder Jetting and Filament Material Extrusion.

In this section, you learn everything about the sinter-based AM  process chain and get an overview of the different printing technologies.

Goal and structure of this course

This course is aimed at engineers, designers and other professionals that are working closely with sinter-based AM technologies. The goal is to cover the most important aspects that will enable engineers and designers to fully grasp the capabilities and technical limitations of the printing technologies and the sintering process to succeed in technology selection and part design. Besides going through the course from the beginning until the end, this course can also act as a constant source of knowledge while working on AM projects. 

The course is structured into the following sections.

This section will start with an overview of the sinter-based AM process chain and its printing technologies, followed by a technology deep dive into the most important aspects of the BJT technology, followed by a closer look at the debinding and sintering step also including sintering simulation .

The second section will provide an overview of the different materials that are available as well as part characteristics that can be achieved with the BJT process and typical methods for quality assurance. Finally, several common defects in the BJT process are presented. 

The last section will act as a guideline for designers. Besides generally describing the process when designing for Additive Manufacturing, actionable restrictions and guidelines for the BJT process are provided. The final section will present several design examples from different industries. 

What you will find in this section

Sinter-based AM process chain

From digital model to finished part

Data preparation

Simulation to compensate the deformation during the sintering step, nesting of parts and definition of printing parameters

Printing

Through various printing processes, different feedstocks such as metal powders, filaments, pellets or dispersions are processed into green parts

Unpacking

Unpacking of fragile green parts needs to be done carefully and is typically a manual process.

Debinding

Debinding describes the process of removing the binder which results in a brown part

Sintering

To reach the structural integrity of a metal part, a sinter process is required. The powder particles fuse together to a coherent, solid structure via a mass transport that occurs at the atomic scale driven via diffusional forces.

The brown part shrinks ~13-21 % in each direction.

The process chain of sinter-based technologies differs from other AM Technologies. Especially the post-printing processes (debinding and sintering) are crucial to achieve the intended mechanical properties.

Technology principle

How does Binder Jetting work?

Binder Jetting is a powder based Additive Manufacturing technology in which a liquid polymer binder is selectively deposited onto the powder bed binding the metal particles and forming a green body.

The metal powder is applied to a build platform in a typical layer thickness of 40 µm to 100 µm. Subsequently a modified 2D print head apply a binder selectively onto the powder bed. Depending on machine technology a hardening or curing process of the binder is performed in parallel for each layer and/or at the end of the whole build. During the in-situ curing process a heat source is used to solidify the binder and form a solid polymer – metal powder composite.

Working Principle of Binder Jetting

Afterwards the build platform moves downward by the amount of one layer thickness and a new layer of powder is applied. Again, the liquid binder is deposited and hardened in the required regions of the next layer to form the green body. This process is repeated until the complete part is printed. After the complete printing process is finished the parts have to be removed from the “powder cake” meaning the surrounding loose but densified powder. To improve the removal of the excess powder from the green body often brushes or a blasting gun with air pressure are used.

To create a dense metal part the 3D printed green body has to be post-processed in a debinding and sintering process. Similar to the metal injection molding process BJT parts are placed in a high temperature furnace, where the binder is burnt out and the remaining metal particles are sintered together. The sintering results in densification of the 3D printed green body to a metal part with high densities of 97 % to 99,5%, dependent of the material.

Printing Technologies

Metal Binder Jetting

Binder Jetting is a powder based Additive Manufacturing technology in which a liquid polymer binder is selectively deposited onto the powder bed binding the metal particles and forming a green body.

The metal powder is applied to a build platform in a typical layer thickness of 40 µm to 100 µm. Subsequently a modified 2D print head apply a binder selectively onto the powder bed. Depending on machine technology a hardening or curing process of the binder is performed in parallel for each layer and/or at the end of the whole build. During the in-situ curing process a heat source is used to solidify the binder and form a solid polymer – metal powder composite.

Working Principle of Binder Jetting

Material Extrusion

Binder Jetting is a powder based Additive Manufacturing technology in which a liquid polymer binder is selectively deposited onto the powder bed binding the metal particles and forming a green body.

The metal powder is applied to a build platform in a typical layer thickness of 40 µm to 100 µm. Subsequently a modified 2D print head apply a binder selectively onto the powder bed. Depending on machine technology a hardening or curing process of the binder is performed in parallel for each layer and/or at the end of the whole build. During the in-situ curing process a heat source is used to solidify the binder and form a solid polymer – metal powder composite.

Working Principle of Binder Jetting

Mold Slurry Deposition

Binder Jetting is a powder based Additive Manufacturing technology in which a liquid polymer binder is selectively deposited onto the powder bed binding the metal particles and forming a green body.

The metal powder is applied to a build platform in a typical layer thickness of 40 µm to 100 µm. Subsequently a modified 2D print head apply a binder selectively onto the powder bed. Depending on machine technology a hardening or curing process of the binder is performed in parallel for each layer and/or at the end of the whole build. During the in-situ curing process a heat source is used to solidify the binder and form a solid polymer – metal powder composite.

Working Principle of Binder Jetting

Metal Selective Laser Sintering

Binder Jetting is a powder based Additive Manufacturing technology in which a liquid polymer binder is selectively deposited onto the powder bed binding the metal particles and forming a green body.

The metal powder is applied to a build platform in a typical layer thickness of 40 µm to 100 µm. Subsequently a modified 2D print head apply a binder selectively onto the powder bed. Depending on machine technology a hardening or curing process of the binder is performed in parallel for each layer and/or at the end of the whole build. During the in-situ curing process a heat source is used to solidify the binder and form a solid polymer – metal powder composite.

Working Principle of Binder Jetting